Paper Band Filter

Brand	Amho
Model Number	XYGL1
Material	Carbon steel
Available Color	None
MOQ	1 set
QEM service	Standard
Packing	Plywood case
Payments	Western union, Money gram, Paypal,,Wire transfer.
Shipping	By sea.By air
Delivery timeCapacity:	Within 15working days after your payment.500L,1000L,2000L,3000L,5000L,10000L
Voltage:Dimension:Application:	380V,415V,480V Non-standardFarm,animal husbandry machinery

Performance And Application

This machine is composed of paper band filter and magnetic separator and combines advantages of the two machines.When processing magnetic work pieces on the grinding equipment,uses will give priority to this machine.

ModelSize	XYGL1-25	XYGL1-50	XYGL1-75	XYGL1-100	XYGL1-150	XYGL1-200	XYGL1-250	XYGL1-300
L(mm)	1050	1200	1600	1600	1800	2200	2540	3000
L1(mm)	250	250	250	290	290	290	290	450
L2(mm)	990	1160	1560	1560	1760	2160	2160	2765
L3(mm)	840	960	1360	1360	1560	1960	1960	2565
B(mm)	460	600	600	800	1080	1080	1080	1080
B1(mm)	490	650	650	850	1130	1130	1130	1130
B2(mm)	400	520	520	720	1000	1000	1000	1000
H(mm)	300	300	300	300	300	300	300	530
H1(mm)	250	250	250	250	250	250	250	450
H2(mm)	445	450	450	465	465	465	465	665

Description

It filters by filtering paper,before working,we should first spread the filter paper on the chain network.Then the emulsion or oil flows to the filtering paper.The liquid follows to the liquid tank,and the impurities are segregated on the filter paper.When the impurities on the filter paper become more,the emulsion can not go through,then a liquid pool is formed on the filter paper.The liquid level floating ball goes up,then it drives the paper motor to work.the used-up paper is pulled out,and a new paper will spread on the filter automatically.the process goes around like this.The filtration precision is determined by filter paper.Normally,the filter accuracy is 10-30μm. Paper band filter is mainly used for filtering the coolant for various machine tool.This device has a pollution,improve effective working hours,reduce the labor intensive of the operator of the machine tool.It also increases the surface finish of the workpiece and improve the quality of the products.  

Maintenance Table

Subassembly/ component	Interval	Action	Safety instructions/ remarks
Drive-   Drive chain	3 months	Check tension and tighten if necessary, lubricate drive chain
-   Bearing of drive  shaft and guide roller	—- —-	Check wear and play	When conveying belt is damaged, check and replace if necessary
Electrical equipment-   Motor(s)	—- —-	See operating instructions of manufacturer
-   Wiring	3 months	Check for ruptures and damage	Replace defective wiring
-   Level switch	3 months	Check function	Exceed both switch points by manual actuation
-   Protective gear	3 months	Check function
Pumps	—-—-	See operating instructions of manufacturer
Containers	6 months	Check for leaks, damage and corrosion	Ensure that no hazardous sub- stances escape
Conveying belt	6 months	Check for damage	Replace conveying belt when damaged

   

Product display