Saving labor time
The block can compress the waste materials of copper, aluminum, iron and stainless steel processed by machine tools
and CNC into a single round cake with a diameter of 80-150mm, or a square cake with a diameter of 300x300mm. The
device is small in shape and can be put together with the workshop processing equipment nearby. After cleaning the waste
materials of machine tools, they can be poured into the hopper. In his spare time, he does bulk work (some clients have
dedicated waste handlers). After the use of the equipment, without manual care, automatic pressing block discharge.
Overall, the waste from the workshop to clean up the material warehouse, plus timely recovery of cutting oil to save labor
time, compared with the previous use of the block press can save a lot of labor time.
Compression ration of the block press
The compression ratio of CNC sawing machine and scrap material is about 6:1, and that of lathe is about 20:1, which
greatly saves the use area of the workshop warehouse occupied by scrap material and also saves the space of the scrap
transport compartment.
The economic benefits of pressing into blocks
The selling price of waste material after block pressing can be increased by about 15%-30%. For the recovery of
cutting oil, the oil is extruded into the container at the same time when the block is pressed, and the re-utilization rate
is about 95%. Therefore, customers can buy the machine for about three months to recover the investment in equipment,
and solve the stacked space and environmental problems of the site.
